TEN 3-2421WIN

DC/DC Converter TEN 3WIN Series, 3 Watt • • Ultra wide 4:1 input range • Extended operating temperature range –40°C to 85°C • Models with 1’500 VDC and 3’000 VDC I/O isolation (functional insulation) • • • DIP-24 package Input filter to meet EN 55032, Class A and FCC, level A without external components High reliability, MTBF >1.0 Mio. h 3-year product warranty UL 62368-1 IEC 62368-1 The TEN 3WIN Series is a drop in replacement of the prevalent TEN 3WI Series. The up-to date design enables a cost reduction without any compromise to reliability and function. They come with an internal filter to meet EN55032 class A without external components. Increased EMC immunity and extended operating temperature range of -40°C to 85°C make these converters an ideal solution for cost critical but demanding applications. With the standard pinning it is a drop in replacement for common 3 Watt converters in DIP24 package. Models Order Code Input Voltage Range TEN 3-2410WIN TEN 3-2411WIN TEN 3-2412WIN TEN 3-2413WIN TEN 3-2415WIN TEN 3-2421WIN TEN 3-2422WIN TEN 3-2423WIN TEN 3-4810WIN TEN 3-4811WIN TEN 3-4812WIN TEN 3-4813WIN TEN 3-4815WIN TEN 3-4821WIN TEN 3-4822WIN TEN 3-4823WIN 9 - 36 VDC (24 VDC nom.) 18 - 75 VDC (48 VDC nom.) Output 1 Output 2 Vnom Imax 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 3.3 VDC 5 VDC 12 VDC 15 VDC 24 VDC +5 VDC +12 VDC +15 VDC 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA 750 mA 600 mA 250 mA 200 mA 125 mA 250 mA 125 mA 100 mA Vnom Efficiency Imax –5 VDC –12 VDC –15 VDC 250 mA 125 mA 100 mA –5 VDC –12 VDC –15 VDC 250 mA 125 mA 100 mA typ. 77 % 79 % 82 % 83 % 81 % 80 % 82 % 82 % 77 % 80 % 83 % 84 % 82 % 80 % 82 % 82 % Options Suffix -HI - Optional models with high isolation (3000 VDC), except 3.3 Vout models www.tracopower.com September 20, 2023 Page 1 / 4 TEN 3WIN Series, 3 Watt Input Specifications Input Current - At no load 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: 24 Vin models: 48 Vin models: - At full load Surge Voltage Under Voltage Lockout Reflected Ripple Current Recommended Input Fuse Input Filter Short Circuit Input Power 30 mA typ. 20 mA typ. 150 mA typ. 75 mA typ. 50 VDC max. (1 s max.) 100 VDC max. (1 s max.) 8.5 VDC max. 17.5 VDC max. 15 mAp-p typ. 10 mAp-p typ. (The need of an external fuse has to be assessed in the final application.) Internal Pi-Type 2 W max. Output Specifications Voltage Set Accuracy Regulation - Input Variation (Vmin - Vmax) - Load Variation (0 - 100%) Ripple and Noise Capacitive Load - Voltage Balance (symmetrical load) - 20 MHz Bandwidth - single output ±2% max. 1% max. 1% max. 1% max. 1% max. (Output 1) 1% max. (Output 2) dual output models: 2% max. single output models: dual output models: single output models: dual output models: 3.3 Vout models: 5 Vout models: 12 Vout models: 15 Vout models: 24 Vout models: 5 / -5 Vout models: 12 / -12 Vout models: 15 / -15 Vout models: - dual output Minimum Load Temperature Coefficient Short Circuit Protection Overload Protection Output Current Limitation Transient Response - Response Deviation - Response Time 70 mVp-p max. 680 µF max. 470 µF max. 330 µF max. 220 µF max. 100 µF max. 220 / 220 µF max. 150 / 150 µF max. 100 / 100 µF max. Not required ±0.02 %/K max. Continuous, Automatic recovery Foldback Mode 120% min. of Iout max. 150% typ. of Iout max. 3% typ. / 5% max. (75% to 100% Load Step) 200 µs typ. / 500 µs max. (75% to 100% Load Step) Safety Specifications Safety Standards - IT / Multimedia Equipment - Certification Documents Pollution Degree Over Voltage Category CSA-C22.2, No. 60950-1 EN 60950-1 EN 62368-1 IEC 60950-1 IEC 62368-1 UL 60950-1 UL 62368-1 www.tracopower.com/overview/ten3win PD 3 Not mains connected All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 2 / 4 TEN 3WIN Series, 3 Watt EMC Specifications EMI Emissions - Conducted Emissions - Radiated Emissions EMS Immunity - Electrostatic Discharge - RF Electromagnetic Field - EFT (Burst) / Surge - Conducted RF Disturbances EN 55032 class A (internal filter) EN 55032 class A (internal filter) EN 55024 (IT Equipment) EN 55035 (Multimedia) Air: EN 61000-4-2, ±8 kV, perf. criteria A Contact: EN 61000-4-2, ±6 kV, perf. criteria A EN 61000-4-3, 10 V/m, perf. criteria A EN 61000-4-4, ±2 kV, perf. criteria A EN 61000-4-5, ±1 kV, perf. criteria A Ext. input component: 200 µF, 100 V, ESR 48 mΩ EN 61000-4-6, 10 Vrms, perf. criteria A General Specifications Relative Humidity Temperature Ranges Power Derating - Operating Temperature - Case Temperature - Storage Temperature - High Temperature Cooling System Altitude During Operation Switching Frequency Insulation System Isolation Test Voltage - Input to Output, 60 s Isolation Resistance Isolation Capacitance Reliability Washing Process - Input to Output, 1 s - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Calculated MTBF Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Footprint Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration - SCIP Reference Number 95% max. (non condensing) –40°C to +85°C +100°C max. –55°C to +125°C 3.3 %/K above 70°C See application note: www.tracopower.com/overview/ten3win Natural convection (20 LFM) 6'000 m max. 90 kHz min. (PFM) Functional Insulation 1'500 VDC (Standard models) 3'000 VDC (suffix -HI, except 3.3 Vout models) 1'800 VDC 1'000 MΩ min. 300 pF max. 1'000'000 h (MIL-HDBK-217F, ground benign) According to Cleaning Guideline www.tracopower.com/info/cleaning.pdf Non-conductive Plastic (UL 94 V-0 rated) Epoxy (UL 94 V-0 rated) Copper Alloy (C6801) Nickel (2.5 µm min.) Gold (75 - 125 nm), glossy Plastic Case PCB Mount THD (Through-Hole Device) DIP24 Lead-Free Wave Soldering 260°C / 10 s max. 12.8 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7a (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule).) eb513e5b-8662-47d4-8669-273b9c3680e1 All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com September 20, 2023 Page 3 / 4 TEN 3WIN Series, 3 Watt Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/ten3win Outline Dimensions Pinout 9 Pin 11 Bottom view Ø0.5 (Ø0.02) 16 14 2.54 23 22 20.3 (0.80) 15.22 (0.599) 3 (0.100) 2 Single Dual 2 in (GND) in (GND) 3 in (GND) in (GND) 9 No pin 11 NC 14 +Vout 16 out Common out +Vout Common 22 +Vin (Vcc) +Vin (Vcc) 23 +Vin (Vcc) +Vin (Vcc) NC: Not connected 4.5 2.54 15.24 (0.600) (0.100) 5.08 4.5 (0.200) (0.18) (0.18) 10.2 (0.40) 31.8 (1.25) Dimensions in mm (inch) Tolerances x.x ±0.5 (x.xx ±0.02) x.xx ±0.25 (x.xxx ±0.01) Pin tolerances: x.x ±0.05 (x.xx ±0.002) © Copyright 2023 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. September 20, 2023 Page 4 / 4